Each and every pool owner will encounter a green or black pool at some point. It is preferable to steer clear of this situation by maintaining and servicing your above ground swimming pool correctly. Reviving your pool to its former clarity requires time, effort, cash and will certainly test your patience. The fantastic news is that there is a surefire system for clearing up a filthy, green pool.
The suggestions shown below must be followed in sequence to ensure the best results for your above ground pool.
1. Get rid of the leaves and debris that is laying at the bottom of the pool. This will stir up the water and worsen the appearance of the pool, but do not worry as it will settle within a few hours. Do not vacuum the swimming pool whilst there is still debris in the bottom as this may surely lead to blockage within the skimmer or filter.
2. Regulate the water pH and alkalinity levels with Ph Plus, Ph Minus and Alkalinity Plus. The water will not clear until these levels are within normal range.
3. Shock the swimming pool using a high concentration of chlorine. This will kill all the algae and bacteria within the pool. For faster results, use liquid shock. Very dirty swimming pools may need repeated dosages of liquid shock over a time period of a couple of days is doses of 3 or 4 gallons. If the needed result is not achieved overnight, add yet another 3 or 4 gallons the following day. Continue this approach until the water color transforms to either a cloudy white or clear. As soon as this result has been reached, add a top quality algaecide to the water.
4. Backwash 3 or 4 times and operate your filter for Twenty four hours. If the swimming pool remains cloudy and the water does not clear, make use of a clarifier. Take note that this really is exclusively for sand filters. You will require 1 ounce of super concentrated clarifier per 5000 gallons of water. If you are unsure of the concentration, merely adhere to the instructions on the label. Operate the filter for an additional 12 hours and let it rest overnight. If carried out properly, the dead algae will drop to the bottom. Vacuum it up first thing in the morning before the rays from the sun reach the swimming pool. Continue operating the swimming pool filter and backwashing it. The more you do that, the quicker it will clear up. You cannot over backwash the filter so do not worry. Remember that D.E. filters have to be topped up through the skimmer after every backwash.
5. Once clean water has been restored to your swimming pool, vacuum up the remaining debris and enjoy.
If following these directions does not clean up your above ground swimming pool with 5 or 6 days, check your filter as it might not be functioning correctly. For more info on maintaining and servicing your above ground pool, visit http://www.aboveground-swimming-pools.com.
The suggestions shown below must be followed in sequence to ensure the best results for your above ground pool.
1. Get rid of the leaves and debris that is laying at the bottom of the pool. This will stir up the water and worsen the appearance of the pool, but do not worry as it will settle within a few hours. Do not vacuum the swimming pool whilst there is still debris in the bottom as this may surely lead to blockage within the skimmer or filter.
2. Regulate the water pH and alkalinity levels with Ph Plus, Ph Minus and Alkalinity Plus. The water will not clear until these levels are within normal range.
3. Shock the swimming pool using a high concentration of chlorine. This will kill all the algae and bacteria within the pool. For faster results, use liquid shock. Very dirty swimming pools may need repeated dosages of liquid shock over a time period of a couple of days is doses of 3 or 4 gallons. If the needed result is not achieved overnight, add yet another 3 or 4 gallons the following day. Continue this approach until the water color transforms to either a cloudy white or clear. As soon as this result has been reached, add a top quality algaecide to the water.
4. Backwash 3 or 4 times and operate your filter for Twenty four hours. If the swimming pool remains cloudy and the water does not clear, make use of a clarifier. Take note that this really is exclusively for sand filters. You will require 1 ounce of super concentrated clarifier per 5000 gallons of water. If you are unsure of the concentration, merely adhere to the instructions on the label. Operate the filter for an additional 12 hours and let it rest overnight. If carried out properly, the dead algae will drop to the bottom. Vacuum it up first thing in the morning before the rays from the sun reach the swimming pool. Continue operating the swimming pool filter and backwashing it. The more you do that, the quicker it will clear up. You cannot over backwash the filter so do not worry. Remember that D.E. filters have to be topped up through the skimmer after every backwash.
5. Once clean water has been restored to your swimming pool, vacuum up the remaining debris and enjoy.
If following these directions does not clean up your above ground swimming pool with 5 or 6 days, check your filter as it might not be functioning correctly. For more info on maintaining and servicing your above ground pool, visit http://www.aboveground-swimming-pools.com.