Safety Information

• As with any electrical device, there is a risk of injury if the hot stone heater is used improperly. To avoid both injury and damage to the appliance, unplug the heater after each use and before cleaning it. Periodically examine the heater, cord and plug to ensure that they are in good condition. Do not use the hot stone heater if the stone heating container, cord or plug are damaged. Note that none of the parts of a hot stone heater are user serviceable; contact a qualified electrician if the appliance experiences a malfunction.
  
  

Using the Heater

• Proper use of your hot stone heater help to keep the appliance in good working condition. Always place the silicone liner in the bottom of the heating container before carefully adding the stones; avoid dumping the stones into the heater, which can damage the container. Fill the container with cool water to the maximum fill line and make sure the appliance is switched off before plugging it in. After powering on the hot stone heater, turn the temperature dial or use the "+" or "-" buttons to set the appliance to the desired temperature; between 120 and 130 degrees Fahrenheit is ideal. An indicator light will turn on when the stones are ready for use.
  
  

Heater Care and Maintenance

• The best way to maintain a hot stone heater is to clean it after every use. Turn the heater off and unplug it. In the interest of safety, allow the heater to cool completely before cleaning it. Carefully take the stones out of the heater; they may still be warm to the touch even after the heater itself has cooled. Wash the heating container in warm water and mild liquid soap; avoid using abrasive cleaners or scouring pads, which can damage the container. Dry the container with a clean cloth before replacing it. The main heating unit should never be immersed in water, but can be wiped with a damp cloth if it becomes dirty.
  
  

Cleaning the Stones

• The stones for your hot stone heater must also be cleaned after each use. You can wash the stones immediately after cleaning the heater or you can wait until they have completely cooled. Wash the stones in a solution of hot water and mild liquid soap; add a little tea tree oil to the soap and water solution, if desired. A sponge or other non-abrasive scrubber works well for wiping the outside of each stone. Rinse the stones under cool running water and lay them on a clean cloth to air dry.