How to Design a Cardboard Boat

By Society & Culture & Entertainment Last updated Tuesday, September/17/2024

1). Cut out four pieces from the cardboard. Cut one rectangular piece measuring 2 inches wide by 6 inches long. Cut two triangular pieces measuring 2 inches wide on each side. Cut two trapezoidal shapes measuring 2 inches wide with one long side measuring 6 inches and one long side measuring 8 inches.
2). Place the rectangular piece onto a flat surface.
3). Squeeze a line of hot glue along the long side of the rectangle.
4). Press the 6-inch sides of the trapezoidal shape onto the hot glue, leaning them out at a 120-degree angle.
5). Allow the hot glue to cool completely.
6). Squeeze a line of hot glue around each edge of the ends of the rectangle and trapezoidal shapes.
7). Press the triangular shapes onto the hot glued ends.
8). Allow the hot glue to cool completely.
9). Paint the entire boat with waterproof paint, inside and outside.
10

Allow the paint to dry completely, then float it in water.

Breaking news and analysis from VeryPages. Politics, world news, photos, video, tech reviews, health, science and entertainment news.