- 1). Unroll the car window, and buff the felt window channel with the scuff pad supplied with your Ventvisor kit.
- 2). Test fit the Ventvisor in the window channel to ensure a good fit prior to exposing the adhesive tape. Insert the front of the visor first, then work your way to the back. Remove the visor once you've created a proper fit.
- 3). Wipe the felt window channel clean with one of the supplied alcohol wipes.
- 4). Remove the first 2 inches of the tape backing from both sides of the visor. Do not touch the exposed tape.
- 5). Wipe the window channel rubber clean with one of the supplied surface prep wipes.
- 6). Insert the front flange of the Ventvisor into the window channel, and work your way to the back of the visor. Pull the two ends of the tape backing to expose the tape.
- 7). Use a slow motion to close the car window completely. Leave the window closed for the next 24 hours to ensure a proper installation.
- 8). Repeat steps 1 through 7 for each of the remaining windows on which you plan to install a Ventvisor.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time