- 1). Place the bow against the side of the EZ press. Use the handle crank to adjust the fingers to match the length of the bow.
- 2). Place the end of the limbs in the fingers with the open end of the bow facing upward. Crank the screw on the finger to clamp on each end of the bow limb.
- 3). Crank the handle to press the bow and release the tension on the bow string. Either replace the string or adjust the length of the string.
- 4). Slowly crank the handle to release the tension on the bow. Release the finger clamps and remove the bow from the press.
- 5). Pull the bow string to ensure it is tight and the draw length is correct. Slowly release the string without dry firing the bow.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post