- 1). Mark out the sink hole with a pencil, using the template that came with the sink. If you don't have a template, turn the sink upside down and take measurements to transfer to the countertop.
- 2). Drill a 1/2-inch hole through the countertop anywhere along the pencil line.
- 3). Insert a downstroke blade into your jigsaw. A downstroke blade's teeth are pointing down.
- 4). Cut along the pencil line, starting at the 1/2-inch hole. Use a piece of cardboard to protect the laminate top from damage. Be careful when you get near the end of your cut. If the cutout is not supported, it could drop and damage the laminate.
- Advertisement -
- Advertisement -
EDITOR PICKS & Articles
- How Do I Choose a Propeller for an Engine & Boat Combination?
- How to Repair an Air Ratchet
- Chevy 409 Specs
- Replacing the Thermostat in an Audi
- How to Change Wiper Blades on a Toyota RAV4
- How to Check the Oil on a 1978 Honda Goldwing
- How do I Change a Fog Light Bulb on a 2005 Chevy Monte Carlo?
- How to Service a Mercruiser Lower Unit
- How to Replace a Venture 3.4 Belt Tensioner
- How to Reset the Warning Lights on the Dash
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
"Home & Garden" Categories
Stay With Us
"Home & Garden" MOST POPULAR
"Home & Garden" Lastest Articles