- 1). Turn off the gas lines, extinguish the pilots on the burners and disconnect the gas lines.
- 2). Remove the burners from your stovetop, then remove the top from your stove. This process will differ, depending on the brand of stove you own. Refer to your owner's manual for the exact steps.
- 3). Clean any dirt and grease off your stove surface with mineral spirits on a clean rag.
- 4). Spray the surface of your stovetop with a Zinc chromate primer, then bake the primer according to the curing directions on the bottle. This usually requires 120 degrees Fahrenheit for 30 minutes and a curing oven large enough to hold the stovetop.
- 5). Sand the surface of the primer with 800-grit sandpaper to remove any imperfections.
- 6). Apply a second coat of primer to the stovetop and cure it using the same temperature and time frame as before.
- 7). Thin the enamel paint using enamel paint thinner. Follow the ratio on the enamel paint container, as every brand of enamel will have its own requirement.
- 8). Apply a coat of enamel paint and cure it for 30 minutes at 120 degrees Fahrenheit.
- Advertisement -
- Advertisement -